Menü

Engineering & CAD / Beispielaufgabe

Generiertes öffentliches Beispiel

Modellieren Sie einen Halter nach seiner Zeichnung.

Eine vollständige Aufgabe von der Zeichnung zum Modell. Jede Datei wird aus einem einzigen Parametersatz generiert; dies ist kein echtes Teil irgendeines Unternehmens.

Einreichungen vergleichen Die Zeichnung lesen

Aufgabenordner herunterladen

Gold-Ausgabe · zum Drehen ziehenBernstein: die von C4 gemessene Bohrung
Der generierte Montagehalter, grau schattiert mit dunklen Kanten: eine Grundplatte mit vier Bohrungen und einer Nut, ein aufrechter Steg mit einer in Bernstein dargestellten Bohrung
Ziehen zum Drehen · + / − zum Zoomen · Doppelklick zum Zurücksetzen
Bereich
Mechanische Bauteile
Aufgabenfamilie
Zeichnung zum Volumenmodell
Zugriffsmodus
Dateien, headless CAD-Kernel
Liefergegenstand
Ein STEP-Volumenkörper
Verifier
Deterministische Geometrie: 3 Gates, 10 Prüfungen
Zeitlimit
45 Minuten
Split
Öffentliches Beispiel, nie in einem Trainings- oder Evaluationsset

Referenzzeichnung

DUF-S-001, Rev. A.

Drei Ansichten in Projektionsmethode 3, aus denselben Parametern generiert wie das Gold-Modell, sodass Zeichnung und Lösung nicht auseinanderlaufen können. Bernstein markiert die tolerierte Bohrung, die der Verifier misst.

Referenzzeichnung DUF-S-001 Rev. A: Vorder-, Drauf- und Seitenansicht von rechts eines L-förmigen Montagehalters, 120 × 80 × 84 Millimeter, mit vier 9-Millimeter-Durchgangsbohrungen in einem Lochbild von 90 × 36, einer Nut von 10 × 30 und einer 18-Millimeter-Bohrung H7 im aufrechten Schenkel, in Bernstein gezeichnet
Generierte Zeichnung · in voller Größe öffnen (SVG, 21,6 KB)

In Aktion sehen

Vergleichen Sie die Einreichungen.

Aufgezeichnete Verifier-Ergebnisse. Gelb markiert die fehlgeschlagenen Prüfungen; klappen Sie einen Bericht auf, um jede Messung zu sehen.

Einreichung wählen

Eingereicht

output/bracket.step  ←  tests/gold/bracket.step
91,297 bytes · sha256 1785336204458725…
The gold solid the verifier compares against
gold solid: must pass strict · as expected, 0.87 s
output/bracket.step  ←  written by solution/solve.py (85,015 bytes, built in 0.61 s)
solution/solve.py: 7,551 bytes · sha256 ae73b38a9cc37870…
The reference solution: solution/solve.py builds the part from the drawing’s dimensions with OCP
reference solution: must pass strict · as expected, 0.91 s
output/bracket.step  ←  tests/probes/alt_rebuilt.step
83,731 bytes · sha256 9a4dc6d362af2d15…
Built another way: two outlines fused, one revolved bore cutter, fillet last; STEP AP242
correct alternative: must pass strict · as expected, 0.88 s
output/bracket.step  ←  tests/probes/alt_bore_18009.step
91,386 bytes · sha256 00e293e59fc76bb1…
The bore at Ø18.009, inside H7, everything else gold
correct alternative: must pass strict · as expected, 0.82 s
output/bracket.step  ←  tests/probes/alt_split_faces.step
118,131 bytes · sha256 69c196eb32cbaa4a…
The gold with every closed face split in two, as some CAD systems write it
correct alternative: must pass strict · as expected, 0.87 s
output/bracket.step  ←  tests/probes/empty.step
0 bytes · sha256 e3b0c44298fc1c14…
An empty bracket.step
reward hack: must score exactly 0 · as expected, 0.68 s
output/bracket.step  ←  a note, and no output/bracket.step
61 bytes · sha256 a1fbda2711798837…
No model, only a note saying the part was modelled and checked
reward hack: must score exactly 0 · as expected, 0.68 s
output/bracket.step  ←  tests/probes/scaled_copy.step
96,498 bytes · sha256 7a19df708266b18d…
The gold solid scaled by 1.02
plausible mistake: must fail strict, caught by C1 to C8 · as expected, 0.91 s
output/bracket.step  ←  tests/probes/bore_oversize.step
91,317 bytes · sha256 201c90aa78c85c88…
The bore 0.4 mm oversize, everything else gold
plausible mistake: must fail strict, caught by C4 · as expected, 0.82 s
output/bracket.step  ←  tests/probes/three_holes.step
86,917 bytes · sha256 d8f2fa15affd4f7e…
One base hole left out
plausible mistake: must fail strict, caught by C6, C7 · as expected, 0.88 s
output/bracket.step  ←  tests/probes/mirrored.step
89,522 bytes · sha256 28dcdc826bc8b551…
The gold solid mirrored left to right
plausible mistake: must fail strict, caught by C3, C8, C10 · as expected, 0.91 s
output/bracket.step  ←  tests/probes/spline_faces.step
135,874 bytes · sha256 5a1a0ede8035bf36…
The gold with every face converted to a B-spline surface: same shape, no true cylinders
plausible mistake: must fail strict, caught by C9 · as expected, 1.87 s

Verifier-Ausgabe · gold strikt bestanden · Reward 1 · Score 1,00

Alle Gates und Prüfungen bestanden.

Vollständige Verifier-Ausgabe
$ bash tests/test.sh output/bracket.step
G1 ok output/bracket.step exists, is not empty and reads as STEP: 91297 bytes, read as STEP
G2 ok exactly one closed, valid solid with positive volume: 1 closed valid solid, 25 faces, volume 209268.6 mm³
G3 ok units are millimetres and the part fits inside a 250 mm cube: millimetre; extent 120.00 × 80.00 × 84.00 mm
C1 ok Envelope: 120.000 × 80.000 × 84.000 expected 120.0 × 80.0 × 84.0 ±0.10 · w10
C2 ok Volume: 209.27 cm³ (+0.00%) expected 209.27 cm³ ±0.5% · w10
C3 ok Overlap with the gold (IoU): 1.0000 expected ≥ 0.995 · w10
C4 ok Bore diameter: Ø18.0000, 3 sections within 0.0000 expected Ø18 H7: 18.000 to 18.018 · w20
C5 ok Bore axis: position, square to B: X 60.000, Z 52.000; square 0.0000 expected X 60.00, Z 52.00 ±0.05; square ≤ 0.02 · w10
C6 ok Through holes: count and diameter: 4 through, all Ø9.000 expected 4 × Ø9.0 ±0.10, through · w10
C7 ok Hole pattern: centre positions: 4 of 4 within 0.10, worst 0.000 expected 90.0 × 36.0 from (15, 14), ±0.10 · w10
C8 ok Slot: width, length, centre: 10.000 × 30.000 at (42.000, 30.000) expected 10.0 × 30.0 at (42, 30) ±0.10 · w10
C9 ok Feature types: all present · faces: 2 cone, 13 cylinder, 10 plane expected bore and holes true cylinders; R6 fillet, 4 × R10, 2 × 1×45° chamfers · w5
C10 ok Handedness: slot X 42.00 < bore X 60.00: left expected slot left of the bore, seen from the front · w5
strict_pass true
reward 1
score 1.00

Verifier-Ausgabe · solve_py strikt bestanden · Reward 1 · Score 1,00

Alle Gates und Prüfungen bestanden.

Vollständige Verifier-Ausgabe
$ bash tests/test.sh output/bracket.step
G1 ok output/bracket.step exists, is not empty and reads as STEP: 85015 bytes, read as STEP
G2 ok exactly one closed, valid solid with positive volume: 1 closed valid solid, 24 faces, volume 209265.5 mm³
G3 ok units are millimetres and the part fits inside a 250 mm cube: millimetre; extent 120.00 × 80.00 × 84.00 mm
C1 ok Envelope: 120.000 × 80.000 × 84.000 expected 120.0 × 80.0 × 84.0 ±0.10 · w10
C2 ok Volume: 209.27 cm³ (+0.00%) expected 209.27 cm³ ±0.5% · w10
C3 ok Overlap with the gold (IoU): 1.0000 expected ≥ 0.995 · w10
C4 ok Bore diameter: Ø18.0090, 3 sections within 0.0000 expected Ø18 H7: 18.000 to 18.018 · w20
C5 ok Bore axis: position, square to B: X 60.000, Z 52.000; square 0.0000 expected X 60.00, Z 52.00 ±0.05; square ≤ 0.02 · w10
C6 ok Through holes: count and diameter: 4 through, all Ø9.000 expected 4 × Ø9.0 ±0.10, through · w10
C7 ok Hole pattern: centre positions: 4 of 4 within 0.10, worst 0.000 expected 90.0 × 36.0 from (15, 14), ±0.10 · w10
C8 ok Slot: width, length, centre: 10.000 × 30.000 at (42.000, 30.000) expected 10.0 × 30.0 at (42, 30) ±0.10 · w10
C9 ok Feature types: all present · faces: 2 cone, 12 cylinder, 10 plane expected bore and holes true cylinders; R6 fillet, 4 × R10, 2 × 1×45° chamfers · w5
C10 ok Handedness: slot X 42.00 < bore X 60.00: left expected slot left of the bore, seen from the front · w5
strict_pass true
reward 1
score 1.00

Verifier-Ausgabe · alt_rebuilt strikt bestanden · Reward 1 · Score 1,00

Alle Gates und Prüfungen bestanden.

Vollständige Verifier-Ausgabe
$ bash tests/test.sh output/bracket.step
G1 ok output/bracket.step exists, is not empty and reads as STEP: 83731 bytes, read as STEP
G2 ok exactly one closed, valid solid with positive volume: 1 closed valid solid, 24 faces, volume 209268.6 mm³
G3 ok units are millimetres and the part fits inside a 250 mm cube: millimetre; extent 120.00 × 80.00 × 84.00 mm
C1 ok Envelope: 120.000 × 80.000 × 84.000 expected 120.0 × 80.0 × 84.0 ±0.10 · w10
C2 ok Volume: 209.27 cm³ (+0.00%) expected 209.27 cm³ ±0.5% · w10
C3 ok Overlap with the gold (IoU): 1.0000 expected ≥ 0.995 · w10
C4 ok Bore diameter: Ø18.0000, 3 sections within 0.0000 expected Ø18 H7: 18.000 to 18.018 · w20
C5 ok Bore axis: position, square to B: X 60.000, Z 52.000; square 0.0000 expected X 60.00, Z 52.00 ±0.05; square ≤ 0.02 · w10
C6 ok Through holes: count and diameter: 4 through, all Ø9.000 expected 4 × Ø9.0 ±0.10, through · w10
C7 ok Hole pattern: centre positions: 4 of 4 within 0.10, worst 0.000 expected 90.0 × 36.0 from (15, 14), ±0.10 · w10
C8 ok Slot: width, length, centre: 10.000 × 30.000 at (42.000, 30.000) expected 10.0 × 30.0 at (42, 30) ±0.10 · w10
C9 ok Feature types: all present · faces: 2 cone, 12 cylinder, 10 plane expected bore and holes true cylinders; R6 fillet, 4 × R10, 2 × 1×45° chamfers · w5
C10 ok Handedness: slot X 42.00 < bore X 60.00: left expected slot left of the bore, seen from the front · w5
strict_pass true
reward 1
score 1.00

Verifier-Ausgabe · alt_bore_18009 strikt bestanden · Reward 1 · Score 1,00

Alle Gates und Prüfungen bestanden.

Vollständige Verifier-Ausgabe
$ bash tests/test.sh output/bracket.step
G1 ok output/bracket.step exists, is not empty and reads as STEP: 91386 bytes, read as STEP
G2 ok exactly one closed, valid solid with positive volume: 1 closed valid solid, 25 faces, volume 209265.5 mm³
G3 ok units are millimetres and the part fits inside a 250 mm cube: millimetre; extent 120.00 × 80.00 × 84.00 mm
C1 ok Envelope: 120.000 × 80.000 × 84.000 expected 120.0 × 80.0 × 84.0 ±0.10 · w10
C2 ok Volume: 209.27 cm³ (+0.00%) expected 209.27 cm³ ±0.5% · w10
C3 ok Overlap with the gold (IoU): 1.0000 expected ≥ 0.995 · w10
C4 ok Bore diameter: Ø18.0090, 3 sections within 0.0000 expected Ø18 H7: 18.000 to 18.018 · w20
C5 ok Bore axis: position, square to B: X 60.000, Z 52.000; square 0.0000 expected X 60.00, Z 52.00 ±0.05; square ≤ 0.02 · w10
C6 ok Through holes: count and diameter: 4 through, all Ø9.000 expected 4 × Ø9.0 ±0.10, through · w10
C7 ok Hole pattern: centre positions: 4 of 4 within 0.10, worst 0.000 expected 90.0 × 36.0 from (15, 14), ±0.10 · w10
C8 ok Slot: width, length, centre: 10.000 × 30.000 at (42.000, 30.000) expected 10.0 × 30.0 at (42, 30) ±0.10 · w10
C9 ok Feature types: all present · faces: 2 cone, 13 cylinder, 10 plane expected bore and holes true cylinders; R6 fillet, 4 × R10, 2 × 1×45° chamfers · w5
C10 ok Handedness: slot X 42.00 < bore X 60.00: left expected slot left of the bore, seen from the front · w5
strict_pass true
reward 1
score 1.00

Verifier-Ausgabe · alt_split_faces strikt bestanden · Reward 1 · Score 1,00

Alle Gates und Prüfungen bestanden.

Vollständige Verifier-Ausgabe
$ bash tests/test.sh output/bracket.step
G1 ok output/bracket.step exists, is not empty and reads as STEP: 118131 bytes, read as STEP
G2 ok exactly one closed, valid solid with positive volume: 1 closed valid solid, 32 faces, volume 209268.6 mm³
G3 ok units are millimetres and the part fits inside a 250 mm cube: millimetre; extent 120.00 × 80.00 × 84.00 mm
C1 ok Envelope: 120.000 × 80.000 × 84.000 expected 120.0 × 80.0 × 84.0 ±0.10 · w10
C2 ok Volume: 209.27 cm³ (+0.00%) expected 209.27 cm³ ±0.5% · w10
C3 ok Overlap with the gold (IoU): 1.0000 expected ≥ 0.995 · w10
C4 ok Bore diameter: Ø18.0000, 3 sections within 0.0000 expected Ø18 H7: 18.000 to 18.018 · w20
C5 ok Bore axis: position, square to B: X 60.000, Z 52.000; square 0.0000 expected X 60.00, Z 52.00 ±0.05; square ≤ 0.02 · w10
C6 ok Through holes: count and diameter: 4 through, all Ø9.000 expected 4 × Ø9.0 ±0.10, through · w10
C7 ok Hole pattern: centre positions: 4 of 4 within 0.10, worst 0.000 expected 90.0 × 36.0 from (15, 14), ±0.10 · w10
C8 ok Slot: width, length, centre: 10.000 × 30.000 at (42.000, 30.000) expected 10.0 × 30.0 at (42, 30) ±0.10 · w10
C9 ok Feature types: all present · faces: 4 cone, 18 cylinder, 10 plane expected bore and holes true cylinders; R6 fillet, 4 × R10, 2 × 1×45° chamfers · w5
C10 ok Handedness: slot X 42.00 < bore X 60.00: left expected slot left of the bore, seen from the front · w5
strict_pass true
reward 1
score 1.00

Verifier-Ausgabe · empty strikt nicht bestanden · Reward 0 · Score 0,00

G1 FAIL output/bracket.step exists, is not empty and reads as STEP: the file is empty (0 bytes)
Vollständige Verifier-Ausgabe
$ bash tests/test.sh output/bracket.step
G1 FAIL output/bracket.step exists, is not empty and reads as STEP: the file is empty (0 bytes)
checks  not scored: a gate failed
strict_pass false
reward 0
score 0.00

Verifier-Ausgabe · claim_only strikt nicht bestanden · Reward 0 · Score 0,00

G1 FAIL output/bracket.step exists, is not empty and reads as STEP: no file at output/bracket.step
Vollständige Verifier-Ausgabe
$ bash tests/test.sh output/bracket.step
G1 FAIL output/bracket.step exists, is not empty and reads as STEP: no file at output/bracket.step
checks  not scored: a gate failed
strict_pass false
reward 0
score 0.00

Verifier-Ausgabe · scaled_copy strikt nicht bestanden · Reward 0 · Score 0,10

C1 FAIL Envelope: 122.400 × 81.600 × 85.680 expected 120.0 × 80.0 × 84.0 ±0.10 · w10
C2 FAIL Volume: 222.08 cm³ (+6.12%) expected 209.27 cm³ ±0.5% · w10
C3 FAIL Overlap with the gold (IoU): 0.8386 expected ≥ 0.995 · w10
C4 FAIL Bore diameter: Ø18.3600, 3 sections within 0.0000 expected Ø18 H7: 18.000 to 18.018 · w20
C5 FAIL Bore axis: position, square to B: X 61.200, Z 53.040; square 0.0000 expected X 60.00, Z 52.00 ±0.05; square ≤ 0.02 · w10
C6 FAIL Through holes: count and diameter: 4 through, all Ø9.180 expected 4 × Ø9.0 ±0.10, through · w10
C7 FAIL Hole pattern: centre positions: 0 of 4 within 0.10, worst 2.100 expected 90.0 × 36.0 from (15, 14), ±0.10 · w10
C8 FAIL Slot: width, length, centre: 10.200 × 30.600 at (42.840, 30.600) expected 10.0 × 30.0 at (42, 30) ±0.10 · w10
Vollständige Verifier-Ausgabe
$ bash tests/test.sh output/bracket.step
G1 ok output/bracket.step exists, is not empty and reads as STEP: 96498 bytes, read as STEP
G2 ok exactly one closed, valid solid with positive volume: 1 closed valid solid, 25 faces, volume 222077.5 mm³
G3 ok units are millimetres and the part fits inside a 250 mm cube: millimetre; extent 122.40 × 81.60 × 85.68 mm
C1 FAIL Envelope: 122.400 × 81.600 × 85.680 expected 120.0 × 80.0 × 84.0 ±0.10 · w10
C2 FAIL Volume: 222.08 cm³ (+6.12%) expected 209.27 cm³ ±0.5% · w10
C3 FAIL Overlap with the gold (IoU): 0.8386 expected ≥ 0.995 · w10
C4 FAIL Bore diameter: Ø18.3600, 3 sections within 0.0000 expected Ø18 H7: 18.000 to 18.018 · w20
C5 FAIL Bore axis: position, square to B: X 61.200, Z 53.040; square 0.0000 expected X 60.00, Z 52.00 ±0.05; square ≤ 0.02 · w10
C6 FAIL Through holes: count and diameter: 4 through, all Ø9.180 expected 4 × Ø9.0 ±0.10, through · w10
C7 FAIL Hole pattern: centre positions: 0 of 4 within 0.10, worst 2.100 expected 90.0 × 36.0 from (15, 14), ±0.10 · w10
C8 FAIL Slot: width, length, centre: 10.200 × 30.600 at (42.840, 30.600) expected 10.0 × 30.0 at (42, 30) ±0.10 · w10
C9 ok Feature types: all present · faces: 2 cone, 13 cylinder, 10 plane expected bore and holes true cylinders; R6 fillet, 4 × R10, 2 × 1×45° chamfers · w5
C10 ok Handedness: slot X 42.84 < bore X 61.20: left expected slot left of the bore, seen from the front · w5
strict_pass false
reward 0
score 0.10

Verifier-Ausgabe · bore_oversize strikt nicht bestanden · Reward 0 · Score 0,80

C4 FAIL Bore diameter: Ø18.4000, 3 sections within 0.0000 expected Ø18 H7: 18.000 to 18.018 · w20
Vollständige Verifier-Ausgabe
$ bash tests/test.sh output/bracket.step
G1 ok output/bracket.step exists, is not empty and reads as STEP: 91317 bytes, read as STEP
G2 ok exactly one closed, valid solid with positive volume: 1 closed valid solid, 25 faces, volume 209130.1 mm³
G3 ok units are millimetres and the part fits inside a 250 mm cube: millimetre; extent 120.00 × 80.00 × 84.00 mm
C1 ok Envelope: 120.000 × 80.000 × 84.000 expected 120.0 × 80.0 × 84.0 ±0.10 · w10
C2 ok Volume: 209.13 cm³ (-0.07%) expected 209.27 cm³ ±0.5% · w10
C3 ok Overlap with the gold (IoU): 0.9993 expected ≥ 0.995 · w10
C4 FAIL Bore diameter: Ø18.4000, 3 sections within 0.0000 expected Ø18 H7: 18.000 to 18.018 · w20
C5 ok Bore axis: position, square to B: X 60.000, Z 52.000; square 0.0000 expected X 60.00, Z 52.00 ±0.05; square ≤ 0.02 · w10
C6 ok Through holes: count and diameter: 4 through, all Ø9.000 expected 4 × Ø9.0 ±0.10, through · w10
C7 ok Hole pattern: centre positions: 4 of 4 within 0.10, worst 0.000 expected 90.0 × 36.0 from (15, 14), ±0.10 · w10
C8 ok Slot: width, length, centre: 10.000 × 30.000 at (42.000, 30.000) expected 10.0 × 30.0 at (42, 30) ±0.10 · w10
C9 ok Feature types: all present · faces: 2 cone, 13 cylinder, 10 plane expected bore and holes true cylinders; R6 fillet, 4 × R10, 2 × 1×45° chamfers · w5
C10 ok Handedness: slot X 42.00 < bore X 60.00: left expected slot left of the bore, seen from the front · w5
strict_pass false
reward 0
score 0.80

Verifier-Ausgabe · three_holes strikt nicht bestanden · Reward 0 · Score 0,80

C6 FAIL Through holes: count and diameter: 3 through, all Ø9.000 expected 4 × Ø9.0 ±0.10, through · w10
C7 FAIL Hole pattern: centre positions: 3 of 4 within 0.10, worst 0.000, 1 missing expected 90.0 × 36.0 from (15, 14), ±0.10 · w10
Vollständige Verifier-Ausgabe
$ bash tests/test.sh output/bracket.step
G1 ok output/bracket.step exists, is not empty and reads as STEP: 86917 bytes, read as STEP
G2 ok exactly one closed, valid solid with positive volume: 1 closed valid solid, 24 faces, volume 210032.0 mm³
G3 ok units are millimetres and the part fits inside a 250 mm cube: millimetre; extent 120.00 × 80.00 × 84.00 mm
C1 ok Envelope: 120.000 × 80.000 × 84.000 expected 120.0 × 80.0 × 84.0 ±0.10 · w10
C2 ok Volume: 210.03 cm³ (+0.36%) expected 209.27 cm³ ±0.5% · w10
C3 ok Overlap with the gold (IoU): 0.9964 expected ≥ 0.995 · w10
C4 ok Bore diameter: Ø18.0000, 3 sections within 0.0000 expected Ø18 H7: 18.000 to 18.018 · w20
C5 ok Bore axis: position, square to B: X 60.000, Z 52.000; square 0.0000 expected X 60.00, Z 52.00 ±0.05; square ≤ 0.02 · w10
C6 FAIL Through holes: count and diameter: 3 through, all Ø9.000 expected 4 × Ø9.0 ±0.10, through · w10
C7 FAIL Hole pattern: centre positions: 3 of 4 within 0.10, worst 0.000, 1 missing expected 90.0 × 36.0 from (15, 14), ±0.10 · w10
C8 ok Slot: width, length, centre: 10.000 × 30.000 at (42.000, 30.000) expected 10.0 × 30.0 at (42, 30) ±0.10 · w10
C9 ok Feature types: all present · faces: 2 cone, 12 cylinder, 10 plane expected bore and holes true cylinders; R6 fillet, 4 × R10, 2 × 1×45° chamfers · w5
C10 ok Handedness: slot X 42.00 < bore X 60.00: left expected slot left of the bore, seen from the front · w5
strict_pass false
reward 0
score 0.80

Verifier-Ausgabe · mirrored strikt nicht bestanden · Reward 0 · Score 0,75

C3 FAIL Overlap with the gold (IoU): 0.9686 expected ≥ 0.995 · w10
C8 FAIL Slot: width, length, centre: 10.000 × 30.000 at (78.000, 30.000) expected 10.0 × 30.0 at (42, 30) ±0.10 · w10
C10 FAIL Handedness: slot X 78.00 > bore X 60.00: right expected slot left of the bore, seen from the front · w5
Vollständige Verifier-Ausgabe
$ bash tests/test.sh output/bracket.step
G1 ok output/bracket.step exists, is not empty and reads as STEP: 89522 bytes, read as STEP
G2 ok exactly one closed, valid solid with positive volume: 1 closed valid solid, 25 faces, volume 209268.6 mm³
G3 ok units are millimetres and the part fits inside a 250 mm cube: millimetre; extent 120.00 × 80.00 × 84.00 mm
C1 ok Envelope: 120.000 × 80.000 × 84.000 expected 120.0 × 80.0 × 84.0 ±0.10 · w10
C2 ok Volume: 209.27 cm³ (+0.00%) expected 209.27 cm³ ±0.5% · w10
C3 FAIL Overlap with the gold (IoU): 0.9686 expected ≥ 0.995 · w10
C4 ok Bore diameter: Ø18.0000, 3 sections within 0.0000 expected Ø18 H7: 18.000 to 18.018 · w20
C5 ok Bore axis: position, square to B: X 60.000, Z 52.000; square 0.0000 expected X 60.00, Z 52.00 ±0.05; square ≤ 0.02 · w10
C6 ok Through holes: count and diameter: 4 through, all Ø9.000 expected 4 × Ø9.0 ±0.10, through · w10
C7 ok Hole pattern: centre positions: 4 of 4 within 0.10, worst 0.000 expected 90.0 × 36.0 from (15, 14), ±0.10 · w10
C8 FAIL Slot: width, length, centre: 10.000 × 30.000 at (78.000, 30.000) expected 10.0 × 30.0 at (42, 30) ±0.10 · w10
C9 ok Feature types: all present · faces: 2 cone, 13 cylinder, 10 plane expected bore and holes true cylinders; R6 fillet, 4 × R10, 2 × 1×45° chamfers · w5
C10 FAIL Handedness: slot X 78.00 > bore X 60.00: right expected slot left of the bore, seen from the front · w5
strict_pass false
reward 0
score 0.75

Verifier-Ausgabe · spline_faces strikt nicht bestanden · Reward 0 · Score 0,95

C9 FAIL Feature types: missing: bore cylinder; 0/4 hole cylinders; R6 fillet ×0; R10 rounds ×0; 1×45° chamfers ×0 · faces: 25 B-spline expected bore and holes true cylinders; R6 fillet, 4 × R10, 2 × 1×45° chamfers · w5
Vollständige Verifier-Ausgabe
$ bash tests/test.sh output/bracket.step
G1 ok output/bracket.step exists, is not empty and reads as STEP: 135874 bytes, read as STEP
G2 ok exactly one closed, valid solid with positive volume: 1 closed valid solid, 25 faces, volume 209268.6 mm³
G3 ok units are millimetres and the part fits inside a 250 mm cube: millimetre; extent 120.00 × 80.00 × 84.00 mm
C1 ok Envelope: 120.000 × 80.000 × 84.000 expected 120.0 × 80.0 × 84.0 ±0.10 · w10
C2 ok Volume: 209.27 cm³ (+0.00%) expected 209.27 cm³ ±0.5% · w10
C3 ok Overlap with the gold (IoU): 1.0000 expected ≥ 0.995 · w10
C4 ok Bore diameter: Ø18.0000, 3 sections within 0.0000 expected Ø18 H7: 18.000 to 18.018 · w20
C5 ok Bore axis: position, square to B: X 60.000, Z 52.000; square 0.0000 expected X 60.00, Z 52.00 ±0.05; square ≤ 0.02 · w10
C6 ok Through holes: count and diameter: 4 through, all Ø9.000 expected 4 × Ø9.0 ±0.10, through · w10
C7 ok Hole pattern: centre positions: 4 of 4 within 0.10, worst 0.000 expected 90.0 × 36.0 from (15, 14), ±0.10 · w10
C8 ok Slot: width, length, centre: 10.000 × 30.000 at (42.000, 30.000) expected 10.0 × 30.0 at (42, 30) ±0.10 · w10
C9 FAIL Feature types: missing: bore cylinder; 0/4 hole cylinders; R6 fillet ×0; R10 rounds ×0; 1×45° chamfers ×0 · faces: 25 B-spline expected bore and holes true cylinders; R6 fillet, 4 × R10, 2 × 1×45° chamfers · w5
C10 ok Handedness: slot X 42.00 < bore X 60.00: left expected slot left of the bore, seen from the front · w5
strict_pass false
reward 0
score 0.95

Ein Lauf am 14. November 2026 im Aufgaben-Container, gebaut aus environment/Dockerfile und mit abgeschaltetem Netzwerk ausgeführt (Docker 29.1.3, Linux): Python 3.12.13, OpenCascade über OCP 8.0.1.1, numpy 2.5.4. 12 Einreichungen: der Gold-Volumenkörper, die Ausgabe der Referenzlösung und 10 Testfälle (2 Reward Hacks, 5 plausible Fehler, 3 korrekte Alternativen), jede in einem eigenen Prozess bewertet: 0,68 bis 1,87 s pro Einreichung, 12,3 s insgesamt. 12 von 12 wie erwartet. Verifier sha256 ea5e7f60c430b8ea…

Aufgabenbeschreibung

Was dem Agenten gesagt wird.

Die Anweisung, die der Agent erhält, zusammen mit den Dateien und Tools, auf die er zugreifen kann.

instruction.md818 Byte

# Model the bracket on drawing DUF-S-001

`project/drawing.svg` is a released drawing (rev A) of a mounting bracket. Model it as one solid and export it as STEP (AP214 or AP242) to `output/bracket.step`.

- Work in millimetres. Put the origin where datums A, B and C meet, with +X along the front edge, +Y towards the web and +Z up.
- Model every feature on the drawing: the four through holes, the slot, the bore with its chamfers, the rounds and the inner fillet.
- Model the Ø18 H7 bore at a diameter inside its tolerance (18.000 to 18.018).
- The drawing governs. Where it is silent, ISO 2768-m applies.
- Python 3.12 with OpenCascade (OCP, the kernel CadQuery is built on) and numpy is installed. You have no network access.

When the file is written, say so in one line. Do not describe checks you did not run.
Der Agent sieht
project/drawing.svg und einen leeren Ordner output/, in /workspace
Tools
Eine Shell, Python 3.12 mit OpenCascade (OCP) und numpy, wie das Dockerfile sie installiert; kein Netzwerk
Vor ihm verborgen
Der Gold-Volumenkörper, die Testfälle und die Prüfungen in tests/, die erst nach Ende des Laufs hineinkopiert werden, und die Referenzlösung in solution/
Varianten
Der Generator nimmt jedes Maß, das Lochbild und die Passung als Parameter, sodass eine Familie viele unterschiedliche Aufgaben ergibt

Liefergegenstand und Verifier

Bewertet anhand der Geometrie, Feature für Feature.

Zuerst die Gates: Eine Antwort, die fehlt, defekt ist oder die falschen Einheiten hat, erhält 0. Dann zehn gewichtete Prüfungen, jede eine Messung mit angegebener Toleranz. Zuerst kommen Vergleiche der Gesamtform. Dann wird jedes tolerierte Feature einzeln gemessen, in Schnitten durch den eingereichten Volumenkörper, und seine Flächen werden auf ihren Typ geprüft.

Datei
output/bracket.step, STEP AP214 oder AP242, genau ein Volumenkörper
Koordinatensystem
Millimeter, Ursprung in den Bezügen A, B und C, Z nach oben; der Verifier richtet vor dem Vergleich zusätzlich an den Bezugsflächen aus
Nicht bewertet
Feature-Baum, Körpernamen, Farben, Layer, wie das Modell aufgebaut wurde
Reward
1 nur, wenn jedes Gate und jede der zehn Prüfungen besteht (striktes Bestehen), sonst 0. Das ist der Trainings-Reward
Score
Summe der Gewichte der bestandenen Prüfungen, geteilt durch 100; 0, wenn ein Gate scheitert. Er zeigt, wo eine Antwort danebenlag

Gates

GateMuss gelten
G1output/bracket.step existiert, ist nicht leer und lässt sich als STEP lesen
G2Sie enthält genau einen geschlossenen, gültigen Volumenkörper mit positivem Volumen
G3Die Einheiten sind Millimeter, und das Teil passt in einen Würfel von 250 mm

Prüfungen

PrüfungWas gemessen wirdSollwertToleranzGewichtung
C1Hüllquader120,0 × 80,0 × 84,0 mm±0,10 mm10
C2Volumen209,27 cm³ (Gold)±0.5%10
C3Überdeckung mit dem Gold-Volumenkörper, ausgerichtet an A, B, CIntersection over Unionmindestens 0,99510
C4Bohrungsdurchmesser, ein Kreis, an die Bohrungswand in drei Schnitten angepasstØ18 H718,000 bis 18,018 mm20
C5Bohrungsachse: Position und Rechtwinkligkeit zu BX 60.00, Z 52.00±0,05 mm; 0,02 mm10
C6Durchgangsbohrungen in der Grundplatte: Anzahl und Durchmesser4 × Ø9,0, durchgehend±0,10 mm10
C7Lochbild: Mittelpunktpositionen90,0 × 36,0, erste Bohrung bei (15, 14)±0,10 mm10
C8Nut: Breite, Länge, Mitte10,0 × 30,0, Mitte (42, 30)±0,10 mm10
C9Vorhandene Feature-TypenBohrung und Löcher echte Zylinder; innere Rundung R6, vier Rundungen R10, zwei Fasen 1 × 45° an der Bohrungnach Flächentyp; Radien nach ISO 2768-m5
C10HändigkeitNut links der Bohrung, von vorn gesehenexakt5

C4, in Bernstein auf Zeichnung und Modell, ist die Prüfung, die kein Vergleich der Gesamtform ersetzen kann.

Testfälle

Falsche Antworten muss er ablehnen, richtige bestehen lassen.

Bevor eine Aufgabe ausgeliefert wird, läuft ihr Verifier auf der Ausgabe der Referenzlösung, auf absichtlich falschen Antworten und auf korrekten, anders aufgebauten Alternativen. Reward Hacks müssen genau 0 erzielen, jeder plausible Fehler muss an den Prüfungen, die er auslösen soll, strikt scheitern, und die Referenzlösung sowie jede korrekte Alternative müssen bestehen. Jede Zeile unten stammt aus dem aufgezeichneten Lauf.

Alle Testfall-Einreichungen und Messungen
EinreichungWas es istArtVom Verifier gemessenErkannt durchScoreStrikt
goldDer Gold-Volumenkörper, mit dem der Verifier vergleichtGold-VolumenkörperHüllquader innerhalb 0,10; Volumen +0,00 %; Überdeckung 1,0000; Bohrung Ø18,0000Nichts1.00Bestanden
solve_pyDie Referenzlösung: solution/solve.py baut das Teil mit OCP aus den Maßen der ZeichnungReferenzlösungHüllquader innerhalb 0,10; Volumen +0,00 %; Überdeckung 1,0000; Bohrung Ø18,0090Nichts1.00Bestanden
alt_rebuiltAnders aufgebaut: zwei Umrisse vereinigt, ein rotierter Bohrungsschnitt, Rundung zuletzt; STEP AP242korrekte AlternativeHüllquader innerhalb 0,10; Volumen +0,00 %; Überdeckung 1,0000; Bohrung Ø18,0000Nichts1.00Bestanden
alt_bore_18009Die Bohrung mit Ø18,009, innerhalb H7, alles andere wie Goldkorrekte AlternativeHüllquader innerhalb 0,10; Volumen +0,00 %; Überdeckung 1,0000; Bohrung Ø18,0090Nichts1.00Bestanden
alt_split_facesDas Gold-Modell mit jeder geschlossenen Fläche zweigeteilt, wie manche CAD-Systeme sie schreibenkorrekte AlternativeHüllquader innerhalb 0,10; Volumen +0,00 %; Überdeckung 1,0000; Bohrung Ø18,0000Nichts1.00Bestanden
emptyEine leere bracket.stepReward HackDie Datei ist leer (0 Byte)G10.00Nicht bestanden
claim_onlyKein Modell, nur eine Notiz, das Teil sei modelliert und geprüftReward HackKeine Datei unter output/bracket.stepG10.00Nicht bestanden
scaled_copyDer Gold-Volumenkörper, skaliert um 1,02plausibler FehlerHüllquader 122,400 × 81,600 × 85,680; Volumen +6,12 %; Überdeckung 0,8386; Bohrung Ø18,3600C1 bis C80.10Nicht bestanden
bore_oversizeDie Bohrung 0,4 mm zu groß, alles andere wie Goldplausibler FehlerHüllquader innerhalb 0,10; Volumen -0,07 %; Überdeckung 0,9993; Bohrung Ø18,4000C40.80Nicht bestanden
three_holesEine Bohrung in der Grundplatte fehltplausibler FehlerHüllquader innerhalb 0,10; Volumen +0,36 %; Überdeckung 0,9964; Bohrung Ø18,0000; Durchgangsbohrungen 3 durchgehend, alle Ø9,000; Lochbild 3 von 4 innerhalb 0,10, größte Abweichung 0,000, 1 fehltC6, C70.80Nicht bestanden
mirroredDer Gold-Volumenkörper, von links nach rechts gespiegeltplausibler FehlerHüllquader innerhalb 0,10; Volumen +0,00 %; Überdeckung 0,9686; Bohrung Ø18,0000; Nut 10,000 × 30,000 bei (78,000; 30,000); Händigkeit Nut X 78,00 > Bohrung X 60,00: rechtsC3, C8, C100.75Nicht bestanden
spline_facesDas Gold-Modell mit jeder Fläche in eine B-Spline-Fläche umgewandelt: gleiche Form, keine echten Zylinderplausibler FehlerHüllquader innerhalb 0,10; Volumen +0,00 %; Überdeckung 1,0000; Bohrung Ø18,0000; weder echter Zylinder noch Kegel noch EbeneC90.95Nicht bestanden

Generiert aus tests/run_results.json, dem Lauf im nächsten Abschnitt. Die zu große Bohrung besteht Hüllquader, Volumen und Überdeckung und wird erst erkannt, wenn die Bohrung gemessen wird, wie in unserer eigenen Geometriestudie. Die B-Spline-Kopie hat die richtige Form und scheitert nur am Feature-Typ: Ein CAM-System oder ein Prüfer findet darin keinen echten Zylinder, den er als Bohrung erfassen könnte.

tests/verify.py · wie C4 und C5 die Bohrung messen
def measure_bore(solid):
    """The Ø18 H7 bore. Cut the web square to the bore at three depths, clear of the
    1 mm chamfers; fit a circle to the bore's outline in each section. The diameter is
    each circle's; the axis runs through the centres (position and squareness, C5)."""
    y0, y1 = web_faces(solid)                  # the web's front and back faces, measured
    ch = SPEC["bore"]["chamfer"]
    depths = (y0 + ch + 0.5, (y0 + y1) / 2, y1 - ch - 0.5)
    nominal = np.array([SPEC["bore"]["x"], SPEC["bore"]["z"]])
    rings = []
    for y in depths:
        loops = round_loops(section_loops(solid, "y", y))   # inner loops that are circles
        near = [l for l in loops if np.linalg.norm(l["centre"] - nominal) < 15]
        if not near:
            return None                        # no bore: C4 and C5 fail
        rings.append(min(near, key=lambda l: np.linalg.norm(l["centre"] - nominal)))
    shift = np.linalg.norm(rings[2]["centre"] - rings[0]["centre"])
    tilt = shift * (y1 - y0) / (depths[2] - depths[0])   # over the web's thickness
    return dict(d=[l["d"] for l in rings], centre=rings[1]["centre"], square=float(tilt),
                roundness=max(l["roundness"] for l in rings))

Am Teil gemessen, nicht aus der Datei gelesen

Der Verifier vertraut nie der eigenen Bezeichnung eines Features. Er schneidet den Volumenkörper rechtwinklig zur Bohrung in drei Tiefen abseits der Fasen und passt in jedem Schnitt einen Kreis an den Umriss der Bohrung an. Der Durchmesser muss in jedem Schnitt innerhalb des 18-µm-H7-Bands liegen; die Achse durch die Mittelpunkte ergibt Position und Rechtwinkligkeit.

Löcher und Nut werden auf dieselbe Weise gemessen, in Schnitten durch die Grundplatte nahe beiden Flächen und auf halber Dicke, sodass ein Loch nur zählt, wenn es durchgeht. Die Feature-Typen (C9) sind die einzige Prüfung, die aus den eigenen Definitionen der Flächen gelesen wird.

Aufgabenordner

Was geliefert wird, Datei für Datei.

Der Download enthält jede unten aufgeführte Datei, einschließlich des aufgezeichneten Laufs und der Skripte, die zu seiner Reproduktion nötig sind.

PfadWas es istGröße
task.tomlID, Bereich, Zugriffsmodus, Zeitlimit, Split, Container, Verifier-Befehl, Reward-Regel, Lösungsbefehl, Rechte1.1 KB
instruction.mdDie Aufgabenbeschreibung oben818 B
environment/DockerfileDer Container des Agenten: Python 3.12, OpenCascade über OCP, numpy, die Zeichnung; zur Laufzeit wird nichts abgerufen1.0 KB
environment/project/drawing.svgDie Referenzzeichnung, Rev. A21.6 KB
tests/test.shFührt den Verifier aus; schreibt zuerst Reward 0, sodass auch ein Absturz oder eine Zeitüberschreitung 0 ergibt836 B
tests/verify.pyDie Gates und die zehn Prüfungen27.0 KB
tests/gold/bracket.stepDer Gold-Volumenkörper, auf der Seite des Evaluators91.3 KB
tests/probes/Die Testfälle: 8 STEP-Volumenkörper, eine leere Datei, eine Notiz, die nur etwas behauptet, und probes.json, das angibt, welchen Score jede Einreichung erzielen muss796.1 KB
tests/run_probes.pyFührt die Referenzlösung aus, dann den Verifier auf ihrer Ausgabe, dem Gold-Volumenkörper und jedem Testfall, und prüft jedes Ergebnis5.1 KB
tests/run_results.jsonDer auf dieser Seite gezeigte Lauf36.9 KB
solution/solve.shFührt solve.py aus und schreibt output/bracket.step398 B
solution/solve.pyDie Referenzlösung: baut den Halter mit OCP aus den Maßen der Zeichnung, ohne den Gold-Volumenkörper zu lesen7.6 KB

Aufgabenordner herunterladen ZIP, 177,3 KB · ein öffentliches generiertes Beispiel, kein Evaluationselement

Der obige Lauf wurde in dem Container durchgeführt, den das Dockerfile baut, mit abgeschaltetem Netzwerk: Zuerst lief die Referenzlösung ohne tests/, dann wurde der Verifier hinzugefügt und ausgeführt.

Sie möchten solche Aufgaben für Ihr Harness?

Nennen Sie uns die Fähigkeit, die Sie trainieren, und das Format, das Ihr Harness erwartet. Sehen Sie sich die Engineering- & CAD-Daten an, aus denen wir Aufgaben bauen, und wie wir Umgebungen bauen.

Beispielpaket anfordern